Default Parameters
AutoBOP allows for the import of distributed parameter maps. Additionally, ASCII parameter grids containing representative values for the modeled area can be imported at any time using the Tools menu. Before representative values are assigned by the user for Vflo™ parameters, however, default values are assigned to each cell in the Vflo™ domain. The list below states the default values for each Vflo™ parameter.
- Roughness: 0.015
- Slope: 0.001
- Channel width: 50.0
- Channel side slope: 1.0
- Baseflow: 0.0
- Wetting front: 0.0
- Effective porosity: 0.0
- Initial saturation: 0.0
- Soil depth: 0.0
- Abstraction: 0.0
- Impervious: 0.0